Home > Products > Aluminum tube > 1100 Aluminum pipe
1100 Aluminum pipe

1100 is industrial pure aluminum, the aluminum content (mass fraction) is 99.00%, and it can not be strengthened by heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity.

Detailed introduction

About 1100 Aluminum

1100 is industrial pure aluminum, the aluminum content (mass fraction) is  99.00%, and it can not be strengthened by heat treatment. It has high corrosion  resistance, electrical conductivity and thermal conductivity, low density and  good plasticity. It can produce all kinds of aluminum materials by pressure  processing, but low strength. Other process properties are basically the same as  1050A. 1100 is usually used to require good formability, high corrosion  resistance and no need for high strength, such as food and chemical handling and  storage equipment, sheet metal products, hollow hardware processed by drawing  goods spinning, welding combination keys, reflectors, nameplates, etc.


Chemical Composition and Mechanical Property

Al

Si

Cu

Mg

Zn

Mn

Ti

V

Fe

99.00

≤0.45

0.05-0.20

---

≤0.01

≤0.035

---

≤0.05

0.00-0.35


Tensile  Strength(Mpa)

≥95(110-136)

yield strength(Mpa)

≥50

EL(%)

(3-5)%

Density(g/cm³)

2.68


Applications for 1100 aluminum

Generally used in utensils, heat sink, bottle cap, printed board, building  materials, heat exchanger components, can also be used as deep stamping  products. It is widely used in all fields from cookers to industrial  equipment.


It is used for requiring good formability, high corrosion resistance and no  high strength, such as food and chemical handling and storage equipment, sheet  metal products, hollow hardware processed by spinning drawing goods, welding  combination key, reflector, nameplate, etc.

Online Message