Aluminum alloy 5005 is industrial pure aluminum, which has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but its strength is low, heat treatment can not strengthen, and its machinability is poor.
About 5005 Aluminium
5005 is similar to 3003 in strength, weldability and processability. 5005 is similar to 3003 in strength and corrosion resistance. The anodized film is brighter than that on 3003 alloy, and is consistent with the hue of 6063 alloy. 5005 aluminum alloy has medium strength and good corrosion resistance. 5005 aluminum alloy is used as conductor, cooker, instrument panel, shell and building decoration.
Chemical Composition and Mechanical Property
Al | Si | Cu | Mg | Zn | Mn | Cr | Ni | Ti | Fe |
余量 | ≤0.30 | ≤0.20 | 0.50-1.10 | ≤0.25 | ≤020 | ≤0.10 | --- | --- | ≤0.70 |
Tensile Strength(Mpa) | 155-195 |
yield strength(Mpa) | ≥125 |
EL(%) | ≥2% |
Density(g/cm³) | 2.75 |
Characteristics and Application
5005 aluminum alloy is similar to 3003 alloy, with medium strength and good corrosion resistance. 5005 aluminum alloy is used as conductor, cooker, instrument panel, shell and building decoration. The anodized film is brighter than that on 3003 alloy, and is consistent with the hue of 6063 alloy.